Formulated from high-purity natural gypsum rock combined with specialized polymers. Our jointing compounds and finishing plasters deliver high crack resistance, smooth trowel workability, and zero shrinkage on drywall and masonry substrates.
EN 13963 (Joint Compounds)EN 13279-1 (Gypsum Plasters)CE MarkingFTL / FCL & Project Supply Only (No Retail)
Available Specifications & Products
Select a product to inspect dimensions, pallet packaging, and request export quotation.
FOB / CIF Quoted
Direct Factory Supply: All dispatches are strictly full truckload (FTL), container (FCL), and major project based. No retail sales.
Polymer-modified dry gypsum powder designed for jointing drywall boards with paper or fiberglass mesh tape. Provides high crack resistance and zero shrinkage.
High-strength gypsum-based adhesive formulated for direct bond dry lining. Securely adheres plasterboard sheets and acoustic insulation panels to masonry walls.
High-adhesion skim coat and surface leveling compound formulated to correct rough plaster textures, concrete imperfections, and trowel marks before painting.
Premixed fast-spreading base floor mortar designed for concrete slabs. Applied at thicknesses greater than 20 mm in a single pass; accepts foot traffic in 2 hours.
Lightweight high-yield machine spray gypsum plaster consuming only 7.5 kg/m²/cm. Covers approx. 25% more wall area per metric ton compared to conventional plasters.
Thickness: 10 - 25 mm Single Coat
Fire Class: Euroclass A1 (Lightweight & High Yield)
Extra-white high-purity molding gypsum plaster. Features rapid initial set, micro-fine particle size for sharp detail reproduction, and zero casting distortion.
Polymer-modified quartz sand bonding primer for smooth dense concrete surfaces. Creates a high-adhesion mechanical key to prevent plaster delamination.
Thickness: Single Coat Roller / Brush Application
Fire Class: A2-s1, d0 (Polymer Concrete Bonding Agent)
Silicone-enhanced flexible, water-repellent tile grout for joint widths from 1 to 6 mm. Resists dirt, mold, and water penetration in interior and exterior tiling.
Thickness: 1 - 6 mm Joint Widths
Fire Class: Euroclass A1 (Water-Repellent & Abrasion Resistant)
Ready-to-use acrylic polymer finishing compound specifically formulated for tape embedding, skim coating, and minor repair work on interior drywall installations.
Thickness: 0.5 - 2.0 mm Son Kat Uygulama
Fire Class: A2-s1, d0 (Acrylic Emulsion Ready-Paste)
Polymer-modified, fiber-reinforced cementitious basecoat mortars designed for exterior thermal insulation boards (EPS, XPS, mineral wool), concrete repair, and block laying.
Thickness: 3 - 5 mm EWI Basecoat, 2 - 20 mm Concrete Repair Mortar
Fire Class: Euroclass A1 Non-Combustible (Cementitious Mineral Mortar)
Export procedures, technical standards, minimum orders, and shipping lead times.
Our standard minimum order quantity is one 40ft High Cube container (FCL - Full Container Load) or one 13.60m standard Mega Truck for road transport. We allow full consolidation of mixed products—you can combine gypsum boards, metal profiles, joint compound, and drywall screws in the same container to optimize your inventory.
We routinely quote and ship under FOB (Port of Mersin, Port of Istanbul Ambarli, Port of Izmir), CFR, CIF (to your designated port of discharge), CPT, and DAP (delivered to your warehouse door for European road transit including Greece, Bulgaria, Romania, and Georgia).
Plasterboards are stacked on heavy-duty wooden dunnage blocks or full export pallets, strapped with high-tensile polyester bands, protected with heavy edge protectors, and wrapped in full UV-stabilized polyethylene shrink hoods. Metal profiles are bundled into small packs (10-20 pcs) and strapped into solid master bundles with wooden spacers for rapid forklift handling.
All gypsum boards comply with European standard EN 520 / EN 15283-1 and carry CE marking, Declaration of Performance (DoP), and independent laboratory fire/acoustic test reports. Our SerProfil galvanized metal profiles comply strictly with EN 14195 and DIN 18182-1 standards.
We operate under standard international trade terms: 30% advance deposit via Telegraphic Transfer (T/T) upon order confirmation with the 70% balance payable against presentation of original Bill of Lading (B/L) and export shipping documents, or 100% Irrevocable Letter of Credit (L/C at sight) opened through a first-class international bank.
Direct Turkish Factory Export
Ready to Order or Need a Proforma Invoice?
Connect directly with our export sales engineering team on WhatsApp for instant container optimization, FOB/CIF pricing, and shipping schedules.
